10/20/2023 0 Comments Astrophotography sigma 150 600mm moonTurning on an image stabilization feature with your camera mounted on a tripod will actually create blur in your image! 9. Your lens’s (and camera’s) image stabilization technology must be turned off as soon as you put your camera on a tripod. (If your camera doesn’t have a mirror lock-up option, you can always shoot in Live View, which will have the same effect!) 8. Lock the mirror up and wait a few seconds to allow any vibrations to settle before beginning your exposure. So if your camera has this option, use it! You see, even the slightest shake of your camera’s mirror can be enough to blur the shot. This can greatly increase your chances of getting a tack-sharp moon image. If you’re working with a DSLR and it has the option, lock up your mirror. If you don’t have either of these gadgets, use the self-timer feature on your camera. Instead, use a cable release or remote trigger to start your exposure. Remember that even the slightest touch could add enough vibration to blur the image. Don’t use the shutter button to start your exposureĭo not manually press the shutter button or even touch your tripod when initiating your moon shot. (This is not an exact science, but it should give you a good starting point.) 6. Then match the shutter speed to your ISO.įor example, if your ISO is set at 200, set your shutter speed to 1/200s. The Looney 11 Rule is similar to the Sunny 16 Rule. It’s designed to help you exposure properly when shooting the moon, while also ensuring you get a fast-enough shutter speed for sharp shots. But all this will do is require a slower shutter speed, and you want to use the fastest shutter speed possible to get that crisp, tack-sharp image. Some may suggest using a neutral density (ND) filter for moon photography to cut back on the bright light of the moon. If you want the moon to take up the entire frame, you will need around an 800mm lens. To successfully capture any kind of detail on the moon, you need at least a 300mm telephoto lens. But if you let your shutter speed relax too much, you’ll end up with all sorts of unwanted motion blur.Ī good rule of thumb for tack-sharp moon photography is to shoot at 1/125s or faster. The moon is so distant, it doesn’t appear to be traveling very fast. While it’s a good idea to use a tripod, you must avoid using a slow shutter speed.īecause the moon is actually moving very quickly around the earth. But since your subject is so small in the frame, even small movements will be exaggerated. You might think that, if you use a fast-enough shutter speed, you can handhold the camera. Since the moon is so small, it is very important to have a sturdy foundation, because even the most minute movement of the camera will cause your image to blur. One of the most important pieces of equipment for shooting the moon is a good tripod. The setting sun lit the city with a warm glow. The April moon, called the “Pink Moon,” rising over Marietta, Ohio.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |